BVLZQ - SOCKETFAST CATALYST

Product Identification

Product ID:SOCKETFAST CATALYST
MSDS Date:10/01/1985
FSC:8040
NIIN:00N052322
Kit Part:Y
MSDS Number: BVLZQ

Responsible Party
ITW PHILADELPHIA RESINS CORP
26 COMMERCE DR
MONTGOMERYVILLE, PA 18936
US

Emergency Phone: 215-855-8450

Info Phone: 215-855-8450

Cage: ITWPH

Contractor
ITW PHILADELPHIA RESINS
454 MONTGOMERYVILLE, PA 18936 US

Telephone: 508-777-1100

Cage: ITWPH

Ingredients

2-BUTANONE, PEROXIDE; (METHYL ETHYL KETONE PEROXIDE)

CAS: 1338-23-4

RTECS: EL9450000

OSHA PEL 0.7 PPM, C

ACGIH TLV: 0.2 PPM, C

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS


PHTHALIC ACID, DIMETHYL ESTER; (DIMETHYLPHTHALATE) (SARA

CAS: 131-11-3

RTECS: TI1575000

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:SEE ING 2
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CORROSIVE TO EYES. CONTACT CAN
CAUSE EXTREME IRRITATION TO EYES WITH POSSIBLE PERMANENT EYE INJURY
AND BLINDNESS. SKIN: SEVERE IRRITATION AND BLISTERING.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
OXYGEN/ARTIFICIAL RESPIRATION) . EYES: FLUSH IMMED W/FRESH WATER
FOR AT LEAST 15 MINUTES. IF POSSIBLE, ALTERNATE RINSING W/A FRESHLY
PREPARED 5% AQUEOUS SODIUM ASCORBATE OR 2% AQUEOUS SODIUM
BICARBONATE SOLUTION & SEEK MD'S ATTN IMMED. SKIN: WASH W/COPIOUS
AMTS OF SOAP & WATER. INGEST: DRINK LARGE AMTS OF MILK/WATER & SEEK
MD'S ATTN.

Fire Fighting

Flash Point Method:SCC
Flash Point:>140F,>60C
Extinguishing Media:WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . AUTOMATIC DELUGE OR APPLY WATER FROM A SAFE
DISTANCE.
Unusual Fire/Explosion Hazard:OXIDIZING MATERIAL WILL BURN VIGOROUSLY -
DIFFICULT TO EXTINGUISH.

Accidental Release

Spill Release Procedures:REMOVE ALL IGNITION SOURCES AND ABSORB WITH
NON COMBUSTIBLE MATERIAL (I.E., EXPANDED MICA, DRY SAND OR
VERMICULITE). REMOVE ABSORBED MATERIAL OUT OF DOORS. WASH AREA OF
SPILL WITH DETERGENT AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE AWAY FROM OTHER MATERIALS IN A
COOL PLACE IN ORIGINAL CONTAINERS AND AWAY FROM ANY SOURCE OF
DIRECT SUNLIGHT, HEAT, FLAME OR SPARKS.
Other Precautions:DO NOT ADD TO HOT MATERIAL AND AVOID ALL SOURCES OF
CONTAMINATION. ONLY GLASS, POLYPROPYLENE, TEFLON, POLYETHYLENE OR
CERAMIC CONTAINERS, FUNNELS OR MEASURING DEVICES SHOULD BE USED TO
AVOID METAL CON TAMINATION DURING HANDLING.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR SHOULD BE WORN TO
PREVENT INHALATION OF HEATED VAPORS OR SPRAY MIST.
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST VENTILATION.
Protective Gloves:CHEM RESISTANT POLYETHYLENE OR (SUDAT)
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (SUPDAT)
Other Protective Equipment:EMERG EYE WASH & DELUGE SHOWER WHICH MEETS
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PROT GLOVES: NON-SOLUBLE PLASTIC. EYE PROT: & FULL LENGTH FACESHIELD .

Chemical Properties

Boiling Pt:B.P. Text:DECOMPOSES
Spec Gravity:1.10 (H*2O=1)
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, COLORLESS LIQUID.
Percent Volatiles by Volume:NEGLIG

Stability

Stability Indicator/Materials to Avoid:NO
METAL CONTAM-COPPER, BRASS,LEAD, IRON & ZINC, MINERAL ACIDS, REDUCING &
OXIDIZING AGENTS & FRIEDEL-CRAFT TYPE CATALYSTS.
Stability Condition to Avoid:SUNLIGHT, HEAT, FLAMES, SPARKS, STATIC
ELECTRICITY, ACIDS, ALKALIES, SOME PLASTICS & CERTAIN RESINS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, DENSE
BLACK SMOKE AND INTENSE HEAT.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.